Introduction:
RPT Motion ( www.DigitalSignMount.com) designs and builds two related portable Video Wall systems:
RPT Modular Portable Video Wall System: For larger video walls (up to 5 high usually) and specific use cases like trade or road shows. These systems are custom Modular Custom built portable free-standing video wall structures designed to support larger arrays in a single or a variety of configurations. Building block modules connect quickly via precision machined quick connectors. Individual modules are small enough to be hand mounted by one or two people to quickly form a rigid ground supported precisely spaced system of RPT GHB drop on monitor mounts.
RPT PopUp Portable Modular Video Wall System: A system of rolling Monitor Stack modules that deploys 2 or 3 monitors high. Monitor Stacks connect horizontally with precision machined structural spacers building arrays as many monitors wide as required. RPT PopUp Modular Video Wall Systems are designed with RPT GHB drop on monitor mounts for fastest simplest deployments almost anywhere. This system is ideal for rental use where flexibility and speed of deployment adds significant value.
RPT’s GHB Mount is common to both of these systems. The GHB mount was developed for portable applications and is a precision machined 3 axis adjustable modular mount that allows quick drop on of monitors to an exactly repeatable position as last adjusted. The GHB mounting system maintains the planarity of the monitor faces and the three axes of micro-adjustability allows quick and precise non-contact bezel alignment and the use of monitor manufacturer corner connection keys.
White Paper:
Multi-Deployment Options for Modular Portable Video Wall Systems
Wall mounted video walls are now relatively common and are becoming more affordable. Larger arrays are becoming more popular as video wall controllers evolve making them easier to configure and simpler to deploy and manage content.
Direct View LED panels and Thin Bezel LCD monitors each have their respective places and uses in the marketplace. Each technology brings a set of limitations, control and mounting complications and costs to potential uses. One key differentiator is that any requirement for the audience to be physically close to the video wall favors the use of high resolution LCD monitors.
This paper concerns portable video walls based on arrays of ultra thin bezel monitors, typically 49” or 55” 1080P video wall monitors.
Video walls return investment by enhancing image or by improving event and meeting results by displaying informative presentations with content and resolution that is difficult or impossible to present well on a single monitor or projector based system.
Video walls usually rely on delivering an audience to the video wall and are mounted permanently in high traffic area. Portable video walls can remove that constraint, letting you take the video wall on the road, allowing you to deliver the content to potential customers at events, trade shows, training or product launches.
Video walls are a significant investment, whether rented or owned, and they become more expensive when they need to be portable. Portable video walls must to bring their own wall structure to the deployment, be free-standing and modular for quick precise assembly. To maximize use portable video wall systems need to be able to be moved quickly and deployed into multiple configurations and locations. The simpler and more reliable a portable video wall deployment, the lower the overall cost of operating it becomes and the more places it will find good uses.
This document explores the use of a very complete and flexible RPT Modular Video Wall System combined with RPT PopUp Modular Video Wall System with using a single pool of Ultra Thin Bezel LCD monitors to serve multiple use cases within a single corporate environment or rental operation.
Example Monitor Pool: 25 x Ultra Thin Bezel 49” or 55”
Use Case One (Largest Deployment): 5X5 for Event or Theater Use
Use summary: Performance or presentation stage backdrop to replace front projection display.
Frequency: 4-6 Times per year for 2-14 days per event.
Mounting Structure: RPT Modular Video Wall: 5 high x 5 wide Landscape ground supported freestanding for 49” 3.5mm bezel to bezel monitors.
Video Wall Controller: Userful Software Video Wall Controller with ThinGlobal Minipoint DS POE Zero Clients mounted on structure. Userful allows maximum flexibility to quickly configure large video walls for a wide range of inputs and content in any layout desired on the 5×5 array. The HDMI over IP basis of Userful allows small POE Zero Clients to be mounted on the modular structure so that any monitor can drop onto any mount without re-configuring the video wall array.
Mounts: RPT GHB-L3 provide secure drop on and easy adjustment of monitor alignment.. The GHB-L3 mounts were designed for portable video wall use. The GHB-L3 mounts maintain planarity of video wall arrays and have 3 axes of micro-adjustment to quickly align bezel to bezel spacing. The mounting system is slightly asymmetrical to allow the ease use of corner key alignment plates common on video wall monitors.
Layout: Fully modular, six legs with leveling feet, two layers. Bottom layer is 3 monitors high based on 3” x 6” structural t-slotted aluminum. Top layer is 2 monitors high based on 3” x 3” structural T-slotted aluminum. Longest module is less than 90 inches long and heaviest module is less than 75 lbs for easy assembly by two workers without heavy lifting equipment.
Flexible Deployment options: This RPT Modular Video Wall structure will allow the video wall to be quickly deployed as either 3 or 5 high and user choice of 2, 3, 4 or 5 wide.
Expansion: One video wall five monitors high will be the vertical limit, but additional columns wide can be added at any time in the future, subject to continued same monitor model availability.
Storage of frame and mounts: RPT Modular frame and RPT GHB Asymmetrical mounts will be disassembled and stored on wheeled storage carts. RPT, as much as possible, will present modules on storage carts in normal assembly order with allowance for less than full deployments if possible.
RPT Modular Portable Video Wall Full 5×5 Frame assembled:
RPT Modular Portable Video Wall 5×5 with Monitors:
Note: Height of bottom monitors is a design variable and can be higher. Front feet will typically be covered with a modular carpeted step.
Use CaseTwo:
Multi-wall multi-facility Deployment for varied uses of smaller video walls
Use summary: When not deployed in Event or Theater mode: Some, most or perhaps all of the 25 monitors will be deployed into smaller arrays in one or more rooms or perhaps different facilities.
Typical deployments will be freestanding 2 x2 and 3 x 3 video walls. The mounts for this use case will be RPT PopUp Portable Video Wall System. We will suggest a mix of 2 High RPT PopUp Monitor Stacks and several RPT PopUp Stacks with the 3 High fold up option. This allows easy expansion should a location require a larger deployment (more walls, bigger walls, or both) for any specific event or purpose.
RPT PopUp Portable Video Wall deployment options:
The RPT PopUp Portable Video wall system uses the same RPT GHB monitor mounting system interface. This reduces overall cost and allows easy exchange of monitors between the RPT Modular 5×5 Video wall and the RPT PopUp video walls. Any monitor in the system can drop onto any mount in the system.
For simplicity of content and set-up, these smaller Multi Purpose Video Wall deployments may or may not have a Userful controller. The controller may have local PC with enough HDMI outputs, or be a controller-less 2×2 or 3×3 daisy-chained tile mode from 4K monitor input.
Here’s a 2 x 2 RPT PopUp Portable video wall, front and rear view for typical trade-show or against the wall use. For corporate or event use we usually propose optional rear covers and doors.
Usually one monitor stack per deployable video wall will have a RPT Modular Rack for the power distribution and video player or controller for each 2×2 or 3×3 RPT PopUp video wall.
The RPT PopUp Stacks are wheeled and flexible. The optional third level deployment is via a fold-up top layer shown folded down in picture below, so they can be deployed 2 or 3 high.
This back folding option keeps the rolling height under normal office and truck door levels and allows rolling onto passenger elevators. The stacks without monitors can roll and deploy almost anywhere in any of your facilities.
Basic Two high stacks can have the third level retrofit at any time, making it easy to start small and expand over time.
Flexibility of deployment:
RPT PopUp Monitor Stacks quickly connect horizontally with precision machined structural bars, and multiple arrays of like or different deployed height can be connected. This allows the great flexibility of deployment almost anywhere,
RPT PopUp Monitor Stacks can be deployed as wide as you have monitor stacks and connectors. Mixed height arrays are easy, so 2 high and 3 high stacks can move and deploy easily and be connected into much larger video walls.
Here’s an example of a 17 monitor array connected from two 2×2 RPT PopUp Video walls flanking a 3×3 RPT PopUp Video Wall. In this deployment case with this hypothetical 25 monitor pool, there would still be eight monitors free allowing two more 2×2 arrays available for deployment at the same event or elsewhere in the company.
Monitor Road Cases:
Monitors must be removed to clear doors when the video wall is moved room to room. For monitor safety during transport or for storage road cases are required.
Some number of Monitor road cases will be required to reasonably protect and transport the monitors from Theatre Use deployment to Multi-Purpose deployments. If required, the transport of monitors and mounts will generally be accomplished by private truck with ramp, lift gate or loading dock level load and unload. Any monitors moving location to location will require road cases and also road cases for any monitors not deployed for safe storage between deployments.
The monitors may not need to be all loaded into road cases at any one time, but more road cases mean fewer trips to harvest and re-deploy monitors between uses. The Calzone-RPT road cases we supply are specially designed for monitors with the RPT GHB interface bracket attached and each holds two monitors.
For a 25 Monitor pool, presuming local deployments for mixed use cases like this system we’d suggest at least seven double monitor road cases to store or transport up to 14 monitors. This limits a complete re-distribution of all monitors to maximum of two loads and assumes that at least 11 monitors must remain deployed on structures at all times.
Summary:
Portable video walls expand your opportunities to present your message to more audiences at more events than a fixed video wall installation. Flexibility and ease of deployment will increase the opportunities.
RPT Motion supplies portable video wall systems with precision modular mounting technology that allows fast reasonable cost deployment. The ease of deployment will result in higher utilization of the significant investment that portable video walls represent.
A system like the comprehensive 25 monitor one outlined here is a very significant investment. It is important to remember that the modularity of the RPT systems will protect your investment by allowing expansion. Acquisition of this comprehensive 25 monitor system could be staged over a period of time by a series of fully functional sub-set acquisitions. A single 2×2 RPT PopUp Portable Video Wall can immediately bring a new dimension to your presentations and events and become the first part of a much larger future system.
Request more information or ask us for a copy of this white paper in pdf format.