Open post

Portable Video Wall Mount Options

Portable Video Walls aren’t well understood. Frankly, people don’t usually move video walls from place to place because they’re expensive complex systems and the available mounting systems aren’t reliable or simple to move. That’s a shame, we have RPT Modular Video Wall customers who deploy large video walls 40+ times in a few months each year at self-managed trade shows and product launches in smaller cities. Our new RPT PopUp System makes it even easier.

Before you consider the RPT PopUp Portable Video Wall System, you should first look at how you will use your portable video wall. The following questions will help you define your needs and narrow down your selection of portable mounting systems.

Basic questions you need to answer:

Have you ever rented a video wall? A 3×3 video wall will typically cost roughly $10K for a three day event, where they are available. Many smaller cities won’t have easy access to rental video walls, and the costs will multiply if transport and set-up costs are added.

How many monitors will your video wall have? What size monitors?

How many times per year will you move your video wall to maximize its impact and ROI?

Will your video wall stay in one room for its lifetime?

Do you need to move your video wall to different rooms or deploy it on different floors of one facility through standard office doors or on passenger elevators?

Is the primary use for your video wall to take to trade shows? If so are these events at large convention centers or self hosted events at hotels in smaller cities or various customer facilities?

Will your video wall be part of a rental program?

Will your video wall always be deployed in one layout (example fixed as 2 Wide x 2 High Landscape Array) or do you want flexibility and future expandability (example the nine monitors in a 3×3 array could be deployed as two 2×2 video walls)?

What type of content will you display on your video wall, what resolution is that content produced in, and what type of video wall controller will you select to place your content on your video wall?

Who will be responsible for the basic integration of the Portable Video Wall mounting, monitors, player, power distribution, cabling and any other required hardware? Where will all that hardware be mounted?

Once you understand the purpose of owning a portable video wall, you can start looking at ways to mount it and more importantly move it.

Option to explore:

The first thing we will do is send you to another top-notch supplier, so that you can educate yourself to some options. At first glance, RPT PopUp Video Walls will seem to be  significantly more expensive than this option, so if this works for you you might be able to save money. Often we find potential customers have budgeted for this type of mounting without fully understanding the limitations. Or worse, they own these mounts and moving the video wall is inconvenient so it never moves place to place.

The lowest cost and simplest portable video wall mounting system is a single cart type of mount for a fixed number of monitors. If this type of mount works for you, please understand the limitations and then choose a quality cart of suitable capacity.

Here’s a link to typical fine example of a quality cart type of single layout mount from Milestone (formerly Chief):


It handles up to 50” monitors and provides micro adjustments mounts for the monitors. It is assembled on site from a kit of parts (Assembly manual link: and the completed assembly measures 80.5” high x 72.5” wide x 40” deep without monitors.

This type of simple single layout cart is a good choice for a simple low cost self-integrated video wall that won’t ever be moved room to room or facility to facility. Even without monitors these carts won’t fit through standard office doors or onto passenger elevators unless you take the cart apart to move it. There are wiring passages in the frame, but you will need to integrate and enclose your power distribution and any network or video wall controller hardware you require to move with the video wall.

All of these integration issues multiply if you’re deploying larger arrays (example 3×3) and each layout of array requires a specific model of cart, there is no clean upgrade path to larger arrays or deploying a large array as two smaller ones.

If a simple cart type of mount works for you, it may at first glance seem to be lower cost than the RPT PopUp System, but the time, integration quality and total cost may vary widely.

Monitors are the most fragile part, and the most expensive:

We’ve seen a lot of poorly mounted simplistic modular portable video walls at trade shows and other events from smaller manufacturers. These can take a long time to properly align into an attractive and professional looking array, an exercise that repeats every time you move your video wall.

You really need to be 100% confident in the rigidity and accuracy of the mounting system when using Ultra Thin bezel monitors (3.5mm Bezel-Bezel like the 49″ Philips BDL-4988XC is the smallest bezel we recommend for portable video walls).

Ultra thin bezels make for easily broken monitor glass with any impact especially to corners. Quality monitors are the biggest cost in a video wall and are the most likely components to be broken when moving a poorly mounted in a portable video wall.

RPT highly recommends properly designed road cases for the monitors of a portable video wall to protect the monitors during a move. RPT partners with Calzone Cases for dual monitor road cases predesigned for maximum protection of the 49” and 55” monitors we recommend. These cases allow one person to safely move two monitors at a time.

Why RPT PopUp Portable Video Walls?

RPT provides a rugged precision portable video wall mounting system designed for modern Ultra Thin Bezel monitors.

Our  RPT PopUp Video Wall deploys quickly, typically a 2 x 2 wall will be content ready in under 30 minutes, often 15 minutes.

Our Monitor stacks include standard front panels and rear cable bins to catch excess cables, this allows simple integration. As well, we build on t-slotted aluminum and that offers an unlimited number of places to secure cables and other hardware.

For more on integrating RPT PopUp Stacks see:

RPT offers options like rear doors to make your PopUp Video wall look finished from behind if needed:

If you’re using an HDMI over Ethernet Video Wall Controller like Userful or MonitorsAnywhere, RPT offers mounted ThinGlobal MiniPoint DS Power Over Ethernet Zero Clients at each monitor location.

We will integrate our RPT PopUp System to any desired level, from naked non-folding mounts for you to integrate all the way to fully folding and wired plug and play. Because of that experience, we’ve already answered most of the hard integration questions and can quickly deliver what you need: A reliable and safe portable video wall, or components to help you do the integration yourself.

We offer an optional  RPT Modular 4U rack mounted to the back of one or more monitor stacks to carry your network, power distribution, Uninterruptible Power Supply and Video Wall Player or Controller hardware securely and neatly.

We always offer expansion and variety of deployment configurations as a retrofit at any time from a basic 2×2 array through 4 high x as many wide as you want, all without losing your initial investment. This can allow multiple smaller video walls or one large one from your pool of monitors. A common example would be one 3×3 trade show Video Wall deployed as two branch office 2 x 2 RPT PopUp Video Walls when not at trade shows.

Or a collection of several branch office RPT PopUp Video Walls merged into a 17 monitor back wall of a 20 foot trade show booth:

Simply put: RPT PopUp Portable Video Walls are a premium option that will make your Portable Video Wall easier to integrate, more flexible, more reliable and easier to deploy more often in more places.

Tell us what you need to do, you’ve answered the questions above, we have the solution.

Open post

RPT PopUp Arrays Non-Linear

Variable Height Arrays

RPT PopUp Portable Video Wall Stacks can deploy at 2, 3 or 4 high across a linear array as wide as you want. The stack spacing is precision set to the monitor width by three precision machined structural crossbars. Note that the stacks can be deployed at differing heights (2, 3 or 4 monitors high) across an array.

Angled Arrays

The stack to stack connection can also be a precisely angled connection, using the same precision connection points on each stack with three custom machined RPT structural connector bars. Same stacks, fast set-up, same accuracy of spacing. This capability allows a lot of flexibility for angled corners, curved arrays and mixes of straight and angled.

Here’s an mock-up of an eighteen monitor, 10 x 20 Foot trade show booth (wall is 20 ft x 10 feet x 8 feet high for reference) with six RPT PopUp 49″  Stacks deployed three high. There is a flat 3 x 3 Array on the left, then the three stacks on the right side form and finish a 90 degree angle.

Another example is a large curved array or two:

We can produce the angled connections at custom angles, so the curve can be gentle for a wide audience or steep for an immersive smaller feel.

Eagle Eye view:


Two Curved Arrays

These could be connected at the rear by a flat array as wide as you want.

A large corner array:

With eight stacks of 49″ Monitors this fills a 20 foot x 20 foot corner with video wall.

If you want a Portable Video Wall with extreme flexibility of simple and creative deployment, rapid and precise set-up, the RPT PopUp Portable Modular Video Wall System has the answers you need.

Please contact us for more information:

Open post

RPT PopUp Video Wall Integration

From naked RPT PopUp Monitor Stacks ready to integrate into your own PopUp Portable Video Wall, to custom fully integrated systems, RPT has got you covered. We know what is required and available to help you ensure that your RPT PopUp Portable Video Wall system is a reliable success in the shortest possible timeline.

We don’t sell monitors with our RPT PopUp mounting systems,  because that would just add to the final cost of a portable video wall. Instead, we qualify and approve several high quality Video Wall monitors in both 49″ and 55″ sizes and build standard quick delivery systems to use with those monitors. We can likely build custom dimension RPT PopUp Stacks to accommodate customer needs or existing fleets of monitors in rental programs that want to add RPT PopUp video walls to their offering. In today’s competitive market, you’re frankly better off buying monitors on our list from the best priced dealer or re-seller in your area or on the Internet.

Monitor Road Cases are a must for any Portable Video Wall, even one that stays in the same facility for its entire working life. We don’t sell Monitor Road Cases, but we have a monitor case partner, Calzone Case Co. who build reasonably priced, very high quality custom road cases that store, protect and safely ship two monitors per case. We work with Calzone Case Co. to ensure that the approved monitor with RPT GHB mount interface attached fits perfectly. RPT supplies a part number for the case and then you deal directly with Calzone Case Co. or you can choose to get your own cases built at your own effort, time and risk.

The RPT PopUp Portable Modular Video Wall System is purposely designed to allow very flexible customer integration. We’ve done a lot of integration and the results are available for our customers. RPT can provide a lot of advice and components to simplify integration of the perfect PopUp Portable Modular Video Wall system for your own choices of hardware. We’ve solved most of the problems you or your local integrator will face. If you’d rather, and are willing to work with the hardware the RPT knows will work, RPT can build and deliver custom fully integrated RPT PopUp Portable Video Wall systems.

Modular means flexible. We can offer many optional features like rear door panels to fully enclose and hide the wiring and mounts while still allowing easy access for adjustment. Because our system is based on structural t-slotted aluminum extrusions, we have tremendous flexibility to add things that you may need.

Unless you’re doing the simplest tiling of a single input 4K image onto a single zone  2 x 2 or 3 x 3 video wall, you will need to choose a suitable multi output media player, or a PC that can handle as many monitors as you want, or a hardware video wall controller, or a software video wall controller like Userful or MonitorsAnywhere. Each solution has specific benefits and costs, as well as limitations. But in any of these solutions, being portable means you’ll need to enclose and transport electronics and wiring.

We prefer having a RPT PopUp Video Wall system with a master stack that has the Video Wall Controller and network infrastructure on-board and connected. The basic video wall controller infrastructure rolls in with one of the stacks.

RPT is a fan of Zero-Client based Video Walls. Zero Clients are basically HDMI over Ethernet decoders. The same exact Zero-Clients and network infrastructure can handle MonitorsAnywhere’s PC based Network Video Wall or Userful’s Software Video Wall Controller. Userful has huge capacity for monitors, inputs, content and complex layouts including artistic layouts and Cloud based management. MonitorsAnywhere basically turns your video wall array into a giant Windows monitor, so anything you can display on your Windows PC can display on your video wall.

Here’s an example of an integration option: RPT PopUp 19″ Rack (4U) that can be added to the rolling base of any standard RPT PopUp Video Wall stack at the rear.

There is a latching rear door and a latched down top cover to protect wiring once your system is deployed. We use industrial grade wire mesh on all other sides for airflow. We can easily customize the height (rack depth) and the types of panels or mesh as needed.

A small PopUp Stack detail that we include standard: You’ll note that just on the other side of the rack is a wire bin that’s built onto every RPT PopUp Stack. It’s an open top enclosed place to drop the extra wire you’re sure to have when quickly setting up RPT PopUp video walls.

This rack has a small format (not rack mount) PC based Userful Server held in place with an RPT CPU Clamp and there’s also a 19″ rack mount POE (Power Over Ethernet) Gigabit Switch. The T-Slotted construction makes it easy to add tie-down points for cables with a low cost quarter turn wire tie mount.

With the top cover off below, the black cables are power cables to the Userful CPU and to the Network POE Switch from the left side mounted surge suppressed power strip, the Blue cables on the right are Ethernet cables to this stack’s  two ThinGlobal Minipoint DS POE Zero Clients, and the red cable is to our in-house network. Note at the bottom left are the only two external connections required to this stack: Power and if needed for content a wired Network.

Userful is immensely powerful and can handle up to 100 Monitors per high-end Userful Server. RPT PopUp Video Walls can connect as many stacks  wide as you own monitors. If you needed a really large array, we’d simply add a second RPT Rack onto an adjoining PopUp Stack to your system to house a Rackmount 4U high-powered Userful Server and of course a much more powerful POE switch with enough POE Ports ad power plus a 10 Gigabit Ethernet to link the few feet between them.

Even with low monitor count Zero-Client based video walls, you’ll probably want to mount a power strip on each RPT PopUp Monitor Stack to supply power to up to four monitors. Then between stacks you need only run an Ethernet cable to each Zero Client on the other PopUp stacks to the POE Switch connected to the Userful Server or Monitors Anywhere Windows PC.

On large arrays, you will likely place the Server Equipped PopUp Stack somewhere in the middle of the array and cable the network outwards towards both sides. The latching door makes it easy to reach the Userful Server power switch or make a connection even when the top cover is latched down to cover the wiring.


Please contact us with any questions you have, we’re happy to be on your  RPT PopUp Portable Video Wall integration team.

RPT PopUp Portable Video Wall Stacks

RPT PopUp Stacks are the building blocks of the RPT PopUp Portable Modular Video Wall System. Each RPT PopUp Stack is a precision mount for a column of two, three or four 49″ or 55″ Ultra Thin Bezel Video Wall monitors in landscape orientation.

An introductory YouTube video on this system:

Here’s the PopUp Stack family picture for the RPT PopUp Portable Modular Video Wall System. Each model shown folded and in the stages of deployment: Folded (if it’s a foldable version), Two High, and Three High. Not shown is the RPT PopTopUltra, an optional quick connect fourth row of monitors, which can be selectively added to RPT PopTopMax and RPT PopTop three high stacks if you need to deploy huge arrays.

RPT PopUp Stacks, without monitors, are designed to roll through standard office doors, onto passenger elevators, and for local deliveries into trucks or trailers, or for Common Carrier LTL freight into the smallest possible road-cases.

RPT PopUp Stacks connect horizontally with precision machined quick connect spacers. In a few minutes these precision spacers form RPT PopUp Stacks into a precisely spaced, rigid and precision aligned structural array of RPT GHB series 3-axis micro-adjustable mounts ready to drop monitors onto.

RPT PopUp Starter System:

RPT PopUp Portable Modular Video Walls protect your initial investment by offering an upgrade and retrofit path to build larger arrays, so there’s nothing to lose by choosing a small starter system.

RPT PopUp Portable Video Wall basic starter system, a 2 x 2 array, front and rear deployed views. This level is the starting point for small business local rental offerings as well as for corporate or commercial uses where a video wall that can quickly move to a different location within a facility or a different facility is valuable.

Extending the RPT PopUp Video Wall System:

By adding as many additional stacks as you need, any rectangular array of 2, 3 or 4 monitors high can be quickly deployed. Larger arrays require a proper Video Wall Controller. RPT can add optional custom mounted ThinGlobal POE ZeroClients and with an HDMI over Ethernet  video wall controller like Userful’s Software Video Wall Controller or MonitorsAnywhere Network Video Wall it becomes very simple to reconfigure one or multiple video walls and display contents from one or multiple inputs to quickly display complex content on the array. For speed and connection convenience, RPT has  options for including a small rack mounted Power Distribution and Gigabit POE Network Switch options on some of your stacks.

Here is an example of a 2 high x 4 wide array, assembled from two RPT PopUp starter systems plus one extra set of precision connector bars.


RPT PopUp Portable Video Wall Multi-Height Arrays:

PopUp Stacks in an RPT PopUp Video Wall have the same bottom row height, but don’t need top be deployed at the same top height. Here’s a simple multi-height deployment assembled from a single three high stack added to a 2 x 2 starter array:

Here’s a PopTop 3×3 Portable Video Wall

Thinking outside the box a bit, owning a 3 x 3 system with 9 monitors, adding a single extra RPT PopUp Stack to your RPT PopUp Video Wall System allows you to deploy two 2 x 2 Arrays in the same or different locations. Or deploy a single 2 high x 4 wide array, plus as many other combinations of 4 single or joined stacks as you have monitors for. That kind of deployment flexibility maximizes flexibility of uses, as well as customer options and deployments in rental businesses, significantly increasing use and payback or income.

The RPT PopUp Portable Modular Video Wall System allows you to quickly deploy small 2 x 2 to truly monster video walls quickly, accurately and reliably. To protect your investment you can start with a small system small and upgrade or expand capabilities incrementally as your needs or markets grow.

Single facility, corporate road show circuit, or small to large rental programs: just let us how big your array should be and how you would imagine using a freestanding portable video wall and we’ll propose a system that meets your needs today and expands to your future needs. Contact RPT Motion for more information on the RPT PopUp Portable Modular Video Wall System:

Open post

Tiling Video Wall Monitors

Tiling: Can or should you lose the Video Wall Controller?

The picture above is a 2 x 2 deployment of the RPT PopUp Portable Modular Video Wall System. This modular, expandable and extensible system allows users to safely dismantle, transport and redeploy small to very large video walls quickly, safely and accurately. The modules wheel through standard office doors and using passenger elevators. The 2 x 2 Entry level system above, in a corporate facility or local rental environment, might be a great application that avoids the cost and complexity of a video wall controller and gives users a simple single port input. Any bigger and you probably want the capabilities and expense of a Software Video Wall Controller.

In the chart above, the left column is a 4K resolution array of 2 x 2 landscape array of 1080P monitors (1920 wide x 1080 high). The third column, a 4 x 4 array of 1080P monitors is 8K displayable resolution which has 4 times as many addressable pixels as a 4K resolution.

You can also compare square footage of an array screen. Given same monitor size, a 3 x 3 array has resolution and screen area 225% of the 2 x 2. A 3 x 3 array of 49″ monitors is over 7 feet high (plus clearance from the floor) and over 10 feet wide.

Resolution Confusion

I recently had a conversation with a video wall customer that highlighted significant confusion some users can feel when implementing a video wall. His high resolution content was the simplest possible: a single 4K full screen feed of 4K movie playing from a dedicated PC in a loop for a museum environment on a 2 x 2 array of large monitors.

Were they better off buying 4K monitors or 1080P monitors? What was the simplest and most cost effective video output from the PC to the array? The question of signage monitor tiling came up, and the customer had been confused by prior misinformation. Once they understood the issues at hand, they chose an array of 1080P monitors able to tile 4K input.

What made this application possible without a video wall controller is the simplest possible full screen single input content, and a perfect match between the 4K input resolution and the 4K array resolution.

Typical Video Walls:

Typically Video Wall Arrays are built with 1080P monitors connected to a PC video card with multiple outputs, to a hardware video wall controller, or to a software HDMI over Ethernet video wall controller like Userful or MonitorsAnywhere. The bigger the array, the more wires and configuration options are available. There are excellent reasons to use  Userful, Monitors Anywhere, or other video wall controllers, but tiling might be a good choice if your content is simple, your array small and you understand the limitations.

Content is important in your decision:

Sometimes we can avoid the complexities and cost of a Video Wall controller or use of a multi-output video card and the related complexity and cost. Before we evaluate and choose the best option, we first need to understand the limits of the content we will display and also the limits of the controller options we might choose.

Tiling: Input Resolution and Output resolution

Most serious digital signage monitors offer tiling options with single input and a daisy chained array of monitors. Earlier models have generally produced less than satisfactory results because they expand the 1080P (1920 x 1080) input signal to as many monitors as you have in your array.  You can manufacture or simulate resolution missing from your input.

Each monitor is assigned an array location at set-up and displays only the proper assigned section of the 1080P signal for that assigned location. A 5 x 5 tiled array of monitors will display each pixel in the 1080p signal at a 5 pixel x 5 pixel “clump” of pixels that may be easily visible. Your array surface may be huge, but your resolution won’t be larger than the original input, so an image viewed from close distances might be grainy.

1080P Full Screen Content as input

If the content input to an array will always be a single 1080P signal displayed full screen, then even the most impressive and expensive video wall controller or monitors can’t improve your displayed resolution. Whether you tile in the monitors or expand in the controller the results will be basically the same. If 1080P will your only content input and will always be output to a full array screen, you will lose display resolution whether you output to a single 4K monitor or an array of 1080P monitors tiled.

4K Full Screen Content

4K inputs might be a single 4K PC monitor output, or perhaps a single 4K output from another 4K source like a 4K Blu-Ray player, 4K AppleTV, etc. If we have 4K content to display, we should have the full 4K monitor resolution from input to screen and be able to display it fully.

A “starter array” of 2×2 landscape 1080P monitors technically has exactly a 4K displayable monitor resolution of 3820 x 2160. If your content is produced and delivered in 4K resolution and will always be displayed full array screen, this seems like a perfect fit.

The newest generations of many digital signage 1080P monitors now offer 4K inputs that can be tiled over daisy-chained arrays, allowing full 4K display at full resolution 4K on a 2×2 Array of 1080P monitors without using a Video Wall Controller. The Viewsonic 49″ and 55″ and Philips 49 and 55″  Monitors that we have qualified for RPT PopUp Video Walls have this functionality to display 4K on 2 x 2 tiled array of daisy-chained 1080P monitors. We suggest that you download the manuals and understand the limitations that may vary between manufacturers and models when 4K to 2×2 Tiling.

These monitors also offer bezel compensation via the monitor set-up menus, so you’ve get everything you need to present a full screen, high quality 4K image from a single 4K input without the expense of a video all controller.

Ultra Thin Bezel (3.5mm Bezel to Bezel)  4K input 1080P signage monitors are common and have been dropping significantly in price  as I write this.

In conclusion, for the simplest content and arrays, the availability of 4K monitor tiling on 1080P monitors brings reduced cost and simplicity of set-up to 2 x 2 or larger Video Wall Arrays. If your content is single output full screen understand the limitations of tiling, you can make an intelligent decision whether you should use monitor tiling instead of a video wall controller.

Ask us for more information on RPT PopUp Portable Video Walls in 2 x 2 Arrays with tiling:

Open post

Fields of View

The digital signage industry is significantly about delivering dynamic content on monitors to generate customer engagement. Too often we fail to consider how we might better locate and focus displays to increase the chances of those displays being visible enough to quickly catch the eye of that customer we want to engage.

Placement and aiming of monitors in retail or other public spaces is a complex subject that could fuel neurological behavioral doctoral dissertations, but a basic understanding of a few parameters might significantly improve your monitor’s chances of being seen well enough to grab the viewer’s attention.

A walking pedestrian is actually a very poor target for digital signage, because we’re programmed with a self protecting nature that focuses while walking on identifying potential obstacles in a narrow forward band from O degrees( level) to approximately 10 degrees downward. As a result, unless we start embedding monitors in floors, it’s most likely that your monitor will first be seen in the peripheral vision of the target audience.

When an object enters the peripheral vision of a walking person we don’t actually think about it, rather it is quickly processed in our subconscious process and evaluated as to importance before we might turn our conscious focus towards it. First priority is danger then interest. It seems entirely logical that a monitor better aimed at the target will probably stand a much higher chance of interrupting the walk, while a monitor aimed poorly will generally just be ignored.

The better the aiming of the monitor at the eyes of the viewer, the more likely the message will be processed as relevant enough to grab the conscious attention of the viewer, ideally even stopping their walk and lifting their eyes.

The harsh reality of most public environments is that monitors must often be mounted in less than perfect locations, above the heads of walkers, or on the sides of typical walking patterns or attached to walls facing on perpendicular or parallel planes to your potential customer’s Field of View.

Stacked monitors starting near floor level and if possible aimed outward from the wall and towards the target are possibly better at getting attention than a single horizontal row of monitors at eye level or above heads.

Many have come to understand that Artistic or Mosaic arrays will also grab more attention. Perhaps some of the subtle magic of an artistic or mosaic array is that their irregular shape can’t simply be processed to be subconsciously ignored as just another rectangular screen.

Here’s a great example video worth watching from Userful of an Artistic Video Wall that’s really impossible to ignore.

Walking towards this complexly creative video wall from either direction will engage a downward looking view because the stacks of monitors rises from close to the floor, plus the 3 high portrait stacks are angled towards the viewer rather than being flat on the wall. The back sides of each zig-zag stack forms a second video wall that engages the reverse traffic with different content. This video wall is a real stop and stare opportunity that grabs attention.

A flexible mounting system is important, but most commercial monitor mounts have evolved slowly from the early era of mounting single monitors flat on a wall. Mounts that can quickly and rigidly mount digital signage monitors at different precisely designed angles aimed at a target are not common. If enough monitors are being mounted, sometimes a custom engineered and fabricated mount is a good option, but that’s likely expensive and long delivery.

Mounting monitors using precision modular assemblies is one of RPT Motion’s specialties. We have extended our proven modular Quick VESA industrial monitor mounting system to include modules that allow freely adjustable or fixed by design options for combinations of pan, tilt and roll angles for an installation may require something different for best visibility. RPT can now offer these options in quickly custom engineered mounts with precise angles that allow much better optimization of where your monitor is aimed.

RPT’s Quick VESA Targeted Focus or QVTF range of products is modular, allowing RPT to quickly propose, quote, build and deliver from one to thousands of ready to install mounts precision built to the best angles for your installation. The QVTF range is especially capable when working with small to medium (24-42”) monitors with VESA 100×100 thru VESA 200×200 mounting patterns. We also have excellent options for larger monitors, so we can offer you angled and multi-sided solutions targeted at all monitor sizes and layouts.

Here’s a standard very simple straight RPT Double sided wall mount which puts the aim of the monitor parallel to the walls and walking path. The “arm” can extend the monitors as far as you wish away from the wall, but they still don’t really ever face most viewers walking towards them.



In the same setting here’s another type of double sided RPT Wall Mount with the monitors angled. The angled monitor faces more easily engage directly with more eyes. These monitors protrude less from the wall, but are more visible.

Our point today is that to maximize your investment you should go beyond generic catalog mounting and properly explore the best options for mounting and aiming your monitors.  RPT Motion’s group has a comprehensive range of monitor mounting engineered modules and 25+ years of quickly building precision modular assemblies with t-slotted extrusions. We combine those assets into custom built for your application monitor mounting systems for just one or thousands of monitors. Mount it properly and it will generate better interest and better returns.

Send us a note about how you want to mount your monitors. We’ll quickly offer you reliable, proven options that are quickly and cost effectively custom tailored to your monitors and location.




Open post

In-Line Array Ideas

We’re tossing some array ideas out to get you thinking outside of a rectangular box.

Sometimes video walls are simpler, single dimensional in-line arrays.

Here’s a nine monitor alternating landscape portrait array.

Here’s the same nine monitors slanted 20 degrees which adds interest:

RPT manufactures a line of modules that form ultra simple precision mounting for in-line smaller monitor arrays like this.

We use an industry standard precision t-slotted aluminum extrusion as a horizontal bar of any desired length up to 20 feet in a single bar.

Then we add one RPT drop-on receiver, and one RPT 360 Degree Rotating Drop On VESA 100 x 100 Adapter per monitor. If no monitor rotation is required we can use the even simpler RPT FM VESA mounts which we developed for Industrial Shop Floor Monitors. The receiver positions adjust as required along the length of the extrusion and simple angle brackets slide along the slots to bolt into supports as required.

Linear arrays don’t always need a wall, they might be bar mounted across reasonable distance open spaces  or hung on a post off a wall and those arrays can be double sided. Here’s a view down the middle of a wall mounted sign post showing the simplicity of our RPT FM-VESA Mounts. Each monitor adapter connects to the extruded bar with a single bolt and alignment precision is machined into the parts.


A wall mounted signpost structure that can be expanded with more monitors.

Ends of aisle, or along walls:

Because our mounting systems are modular, RPT Motion Inc. can quickly design and deliver a single monitor or array of monitors mounting system configured to your needs.

Tell us what you need, we’ll get back to you quickly with a custom proposal delivered quickly with standard RPT Modules.

Open post

Mounts for Mosaic Video Wall of Smaller Monitors

Example 9 Monitor Mosaic Video Wall layout

Eye grabbing Artistic or Mosaic Video walls are often built with smaller 24-32″ monitors. Smaller monitors are especially interesting where wall space is limited, the viewer will be relatively close to the video wall, or perhaps higher overall resolutions are desired. Common examples would be a wall behind a reception desk in a corporate entry, or a shallow retail storefront window.

The pixel density per square inch is higher with an array of small monitors than with larger monitors. The nine monitor layout above, designed with NEC’s exceptional EX241-UN 24″ Ultra Thin Bezel 1080P Monitor is 58.5″ High and 83.5″ wide at the points and has 18.6 Million individually displayable pixels. For reference it takes up the wall space of an approximately 102″ diagonal single monitor, which if 4K resolution would display only 8.3 million pixels.

Displaying high resolution content on multiple displays is no longer a challenging software or hardware problem. Video Wall Controllers, like Userful’s Software Video Wall Controller, simplify the display and content management of a wide variety of high resolution source content output to multi-monitor arrays of rectangular, or  rotated and randomly placed monitors. Userful can output full resolution 8K video which has over 33 million displayable pixels and even higher resolutions for static images like fashion photos.

Typically 24″ ultra thin bezel monitors like the NEC EX241-UN or the the Viewsonic VP2468 will have a VESA 100mm x 100mm mount.  Smaller VESA wall mounts were designed for mounting single monitors at the lowest possible cost, they have minimal or no adjust-ability and are therefore very poor choices for mounting arrays, especially artistic or mosaic arrays where rotation is required. If you don’t have the required adjust-ability in the mounting your array will rely on a lot of installer skill and a lot of time to properly align, if it’s even possible to get a good alignment.

With the introduction of RPT Motions’ QVWM-DM3 wall mount, mounting and aligning complex arrays of small monitors is no longer an obstacle.

RPT Motion Inc. identifies the key adjust-ability requirements for mounting rectangular or artistic arrays as:

  • X axis (horizontal) Micro Adjustable
  • Y Axis (vertical) Micro Adustable
  • Rotation Axis adjustable through 360 degrees and lockable
  • Drop on- Lift off monitor interface
  • As thin as possible to minimize projection from wall

With a mount that allows these adjustments, you can simply locate the design center of your monitors on the wall, secure the mounts to the the wall within about half an inch of the design locations, drop the monitors on in sequence, “float and rotate” the monitors into perfect alignment finishing with a small even gap between bezels in a minute or less. Once aligned, the monitors lift off and replace with precision.

Adjustments to monitor plane (Tilt, Pan and Z axis) are less critical for small 24″ monitors than giant 60″ monitors. A precision built mount on a flat wall can usually provide very good to excellent array flatness without the complexity and physical size of those adjustments.

When mounting small monitors in arrays, what we at RPT Motion  call the wall-print or the face view X-Y size of the mount is critical as it must be small enough to hide behind a small monitor rotated to any angle the array designers decide upon.

RPT has released their QVWM-DM3 Mount that’s perfect for arrays, simple or complex, rectangular or artistic of small monitors.

Here’s that same layout of NEC EX241-UN 24″ monitors as above, with the central monitor hidden so you can see the small wall-print of the ultra compact RPT QVWM-DM3 mount:

For 36+ years, RPT Motion has built high precision industrial automation components and systems for manufacturing and aerospace industries. We hold CNC machined tolerances of < 0.001″ every day, and we design tightly integrated mechanisms using state of the art CAD/CAM.

The basis of the RPT QVWM-DM3 is a precision CNC machined  aluminum ultra compact micro-adjustable X-Y translator that provides an easy to mount stable wall plate with 2.00″ (+/- 1.0″)  of X via hand knob and 2.00″ (+/- 1.0″) of  Y via  7/16″ hex micro-adjustment and an integrated receiver slide for the drop on system.


The QVWM-DM3 monitor interface provides an integrated handle for easy lift off, full 360 degree rotation with locking, and can be delivered with 75 x 75 or 100 x 100 VESA Mounting patterns. Other sizes (100 x 200, 150 x 150,  etc.) are possible, and an upcoming big brother will handle VESA 200 x 200. The precision drop on slide engages easily and repeats location very precisely.

Here’s how the drop-on works:

The QVWM-DM3 is very thin for a mount with these features and this much adjust-ability, just 2.5″ from wall surface to VESA mount surface:

And here’s a rear view of that 9 monitor array using QVWM-DM3 mounts.

The capabilities, rigidity, adjust-ability and precision of the RPT QVWM-DM3 mount are unique in our industry and finally make quick accurate mounting of complex arrays of small monitors simple.

Please contact us for more information:

Open post

Mount Basics

How much adjustment is enough?

We at RPT just can’t walk past a video wall without looking at and most likely critiquing the installation and alignment.  Most video walls are not well aligned and we wonder why. Recently, at InfoComm 2017, the AV industry showcase convention, I walked the floor and estimate that fully 75% of the video walls could have been improved significantly with proper alignment and 25% of them were just plain awful. Our own industry should be showing perfectly aligned video walls, if not something is wrong with either the mounts or the installers.

Let’s face it; mounts are usually the final afterthought in any video wall project, the last thing to worry about and buy before slapping those expensive monitors onto the wall. Mounts are simple, aren’t they?

If mounts are so simple, then why are there so many badly aligned video walls? Perhaps installers aren’t as skilled as they should be?  The wall was more crooked than we expected? We ran out of time, money or both?

A poorly aligned, badly installed video wall is a poor reflection on your brand and your attention to detail, so you should understand how to avoid installation problems. It begins with understanding what a mount needs to do and buying a mount that can be adjusted in your application.

RPT has researched monitor mounting and developed our own mounts where we couldn’t find acceptable alternatives in the industry. We’ve proven, in our testing, that quality Monitors are very accurate and a rigid precision assembled structure can deliver acceptable alignment without any adjustments. In the real world, walls aren’t precision structures, and installers don’t have the tools to measure and mount to less than a hundredth of an inch. SO adjustment will always be required.

There are six axes of possible monitor adjustment:

  • Lateral (X axis)
  • Height (Y Axis)
  • Tilt (Top to bottom relative to wall)
  • Pan (Side to side relative to wall)
  • Roll (Rotation about center of Face, clockwise or counterclockwise)
  • Depth (Z Axis)

Mounts you choose may offer all of these axes of adjustment, or only a few. Some axes may be achieved by combination, example Roll is most commonly adjusted by differential adjustable heights left and right and that works well. Buy onyly what you need, but choose too little adjustability and even the best installer won’t be able to deliver a perfectly aligned video wall.

The Minimum number of adjustable axes to easily achieve good alignment really depends on the flatness of your mounting surface, the skill of your installer and the time allowed to align the array.

Three axis Mounting

A well built flat wall can align an array with three axes: X, Y and Roll only. The bezel to bezel spaces can be near perfect but the planar alignment may not be 100% perfect if the array face is viewed from the side at a steep angle.

RPT’s MVW-GHB L3 Modular Portable video walls are precision assemblies. We build them with RPT GHB 3 axis precision machined mounts of our own design with excellent results. Our customers move these video walls many times per year, and set-up and alignment must be fast and accurate each time. One big advantage is that we don’t need or use a wall; we mount onto a precision modular free-standing structure that assembles flatter than most walls,

Six Axis Mounting

A badly out of true wall will generally need all six axes of adjustment and if the mount chosen has the range of adjustments, and the installer is well equipped, skilled and allowed enough time, the array can be adjusted absolutely flat and perfectly aligned. A badly aligned array with excellent mounts is the installer’s fault.

RPT’s MVW ConnexSys L6+ single or double sided freestanding video wall structures are a great six axis example. We integrate them with the Chief ConnexSys mount that provides wide range full six axis stress free adjustment system with a pull-out for installation and service.

Pull out or drop on?

Monitors should be easily loaded onto the mount. Small monitors drop on easily to some mounts. Large arrays of large monitors should have a pull-out feature to allow center monitors to be removed and replaced without removing a bunch of other monitors. Pull outs also allow easier connections after that heavy monitor is supported. There’s more engineering with pull-outs. You must confirm that the mounting wall’s structure can safely accommodate the overhung loads of your monitor’s weight pulled out to the maximum the mount allows, and one shouldn’t presume that only one monitor at a time will be pulled out at a time. You’ll need to manage a strategy for releasing the monitors or ensuring that they can’t be released by just anyone.


Hard for me to believe and I won’t name names, but some big name six axis pull-out mounts for large monitors can be adjusted in combinations that twist and stress the frame of that expensive thin bezel monitor. Thin bezel monitors are expensive, and fragile.  At RPT we insist that mounts never impart extra stress to the monitor no matter how they are adjusted.

Arrays of small monitors

Small monitors (VESA 100×100 and 200×200) present special challenges because there are few fully adjustable options for those smaller monitors. As a result, RPT has developed the RPT Wall Mount 3 Axis Artistic Drop on that handles rectangular and artistic layouts of small and medium monitors. We will soon release a full six axis version of the same mount, making perfect alignment of small monitor arrays easy.


Arrays of monitors should have tiny spaces between bezels. Commonly described as the thickness of a business card, approximately 0.025 Inches or 0.6mm is perfect. Not all monitor bezels are perfectly straight, so we set the design gap at 0.040 or 1 mm and ensure that there is a small gap everywhere along each edge. Gaps are essential to ensure that the weight whole stack of monitors isn’t pushing down on the top edge of the bottom monitor. A business car should slide down the gap without binding. Easy to adjust mounts make that perfect gap easy to set while harder to adjust mounts get the “good enough” in frustration and the result rarely is good enough.

Arrays should present as flat a face as possible. If the array is set back some distance and only viewed from relatively narrow front angles, this is far less important than other adjustments. If a person can walk past parallel to the face of the array, planar misalignment becomes much more obvious and just looks sloppy.


The cost differential between great mounts with enough adjustment and terrible mounts that can’t be aligned is a tiny fraction of what your video wall will cost. Don’t blame your installer if you choose the wrong mounts and they can’t install a perfect video wall, usually for cost reasons, and the results are less than optimal. On the other hand some installers don’t have the skills or attention to detail even with the best available mounts.

If you want more information on RPT Video Wall Mounting Systems or wish to discuss challenging video wall installations please contact us.

Open post

Single Monitor Video Walls

When we hear “Video Wall”, we usually think many big monitors and lots of money to spend. It doesn’t cost a huge amount of money to try digital signage or video walls. If you’ve got or can create content that can pass messages to your customers and drive some sales improvement a small investment can pay back quickly even in very simple implementations. A simple web page of daily or weekly specials isn’t that hard to generate as a start.

Video Walls can start as simple as one small monitor each, and expand to as many locations as you need. Most facilities with successful digital signage grow to many digital signs, each either single monitors or arrays of monitors.

It’s good practice to plan early for success and required future growth, because you don’t want to lock into hard to expand or manage structures for video wall hardware and software from the beginning.

Here’s a simple start: a standard RPT Motion simple rugged signpost mount, designed for wall mounting of one, two or more monitors back to back. Commonly used on ends of aisles or along sides of aisles to highlight and inform.

We’ll use an hypothetical small grocery store as an example, and start with a simple, attractive, rugged and affordable RPT  Digital Signpost Mount with two 24″-39″  1080P monitors of your choice, one on each side in either portrait or landscape. Place it somewhere with traffic, just above a tall head walking past.

There are many ways to drive two monitors at low cost. Example One would be a low end signage player, a Mini Windows 10 PC like an Intel NUC which can drive two monitors, connects to the Internet via WiFi. To keep it low cost, you can then use a free content management system like Rise Vision to prepare, schedule and manage what’s being displayed when and where. There is usually a fan and perhaps other moving parts if you use a hardrive instead of an SSD.

Additionally, there will be inevitable Windows updates and other  PC management of the NUC Player, but really not a big deal as you’ve only got one tiny simple PC to add to your thinking. Any updates or maintenance will require a keyboard and a mouse to work, so you’ll need a ladder to connect and update as required.

Windows base players just can’t deal with separate screens, so to stay cheap you’d have to be a bit creative and accept some inconvenience with Rise Vision or other content managers to set up the back to back screens as one Windows desktop and then build your presentations accordingly. Probably just easier to bite the bullet and manage with one Intel NUC player per screen, they’re really not that expensive, just double the number of NUCs and power supplies and put one on each monitor.

The above solution works, is quick, simple, low cost, relatively reliable and also short sighted. It’s hard to manage and hard to grow.

Very few locations have just one aisle or location calling for digital signage, so now let’s deal with the future scenario of ten double sided end of aisle units highlighting specials in each aisle.

Now, you’ve got twenty monitors requiring a different content source for each, in effect twenty small single monitor video walls.

Suddenly you’ve got twenty mini PC’s with power supplies and fans to manage and maintain, hanging up in the air accessing your WiFi with twenty passwords that need changing if you change your router WiFi password. No WiFi connection, no content.

Twenty is a realistic number of screens for a small to medium grocery store with active marketing plans and content, a larger store could eventually swallow a hundred screens with each screen adding sales opportunities every minute of every day. A chain of stores, local, regional or national could have thousand of screens to manage.

You need a simple, reliable and fully scalable solution with a low cost of entry. The good news is that it’s ready for you.

Here’s an affordable reliable starting strategy with unlimited growth potential:

If your content is basically static images or web pages, a single low end Userful Software Video Wall Server, based on standard PC hardware that can cost less than an Intel NUC costs,  and can easily feed content to nine 1080P screens via a single Gigabit Ethernet Switch. Two standard Gigabit Ethernet ports wired to each signpost is easy to do, not expensive, easy to manage and very reliable compared to WiFi.

Probably better to spend just a little more and start with the mid-range Userful Software Video Wall Server for better performance, growth potential to forty 1080P monitors and 4K input cards, guarantees the ability to smoothly add more input sources, and smooth video wherever needed for more active and creative promotions.

The Userful Video Wall Server can be located anywhere on the network in your building, so it can be securely locked in an office. The almost unlimited content sources and configurations can be managed by the browser based Userful UCC from any PC,  tablet or smartphone on the network, so when those avocados on sale in aisle 7 sell out, it’s easy for the produce manager to bring up the next special sale for aisle 7. Userful’s API allows much more complex scheduling and control, if needed.

Each monitor would have a “no moving parts, and no maintenance” Zero Net Client, which is included in the cost of the USerful license,  mounted to the rear of the monitor,  drawing just a few watts of power from a monitor USB port or via POE. The Userful Server uses the Zero Client to decode from Ethernet to full 1080P HDMI at the monitor.

You can use your choice of Content Management systems or devise many local only or web strategies to schedule and manage your content and sources, including HDMi inputs if you want to distribute broadcast TV to some signs.

In the future, you might decide to add a few multi-monitor video walls around your store, and that’s no problem because Userful can handle up to 100 monitors per Userful Software Video Wall Server. Just install the monitors, connect Ethernet and add licenses.

Start small, but be smart early and success will come easier and at much lower cost.

Think ahead and plan for success by building unlimited video wall potential with RPT’s Video Wall mounting systems and Userful’s Software Video Wall Server from your first screen.

Contact us by this form to talk about one or many RPT Digital Signpost systems with Userful Server starter package that fits your needs now and can grow with you.

Posts navigation

1 2
Scroll to top