Open post

Multi Deployment Portable Video Wall Systems

Introduction:

RPT Motion ( www.DigitalSignMount.com) designs and builds two related portable Video Wall systems:

RPT Modular Portable Video Wall System: For larger video walls (up to 5 high usually) and specific use cases like trade or road shows. These systems are custom Modular Custom built portable free-standing video wall structures designed to support larger arrays in a single or a variety of configurations. Building block modules connect quickly  via precision machined quick connectors. Individual modules are small enough to be hand mounted by one or two people to quickly form a rigid ground supported precisely spaced system of RPT GHB drop on monitor mounts.

 

RPT PopUp Portable Modular Video Wall System: A system of rolling Monitor Stack modules that deploys 2 or 3 monitors high. Monitor Stacks connect horizontally with precision machined structural spacers building arrays as many monitors wide as required. RPT PopUp Modular Video Wall Systems are designed with RPT GHB drop on monitor mounts for fastest simplest deployments almost anywhere. This system is ideal for rental use where flexibility and speed of deployment adds significant value.

RPT’s GHB Mount is common to both of these systems. The GHB mount was developed for portable applications and is a precision machined 3 axis adjustable modular mount that allows quick drop on of monitors to an exactly repeatable position as last adjusted. The GHB mounting system maintains the planarity of the monitor faces and the three axes of micro-adjustability allows quick and precise non-contact bezel alignment and the use of monitor manufacturer corner connection keys.

 

White Paper:

 Multi-Deployment Options for Modular Portable Video Wall Systems

Wall mounted video walls are now relatively common and are becoming more affordable. Larger arrays are becoming more popular as video wall controllers evolve making them easier to configure and simpler to deploy and manage content.

Direct View LED panels and Thin Bezel LCD monitors each have their respective places and uses in the marketplace. Each technology brings a set of limitations, control and mounting complications and costs to potential uses. One key differentiator is that any requirement for the audience to be physically close to the video wall favors the use of high resolution LCD monitors.

This paper concerns portable video walls based on arrays of ultra thin bezel monitors, typically 49” or 55” 1080P video wall monitors.

Video walls return investment by enhancing image or by improving event and meeting results by displaying informative presentations with content and resolution that is difficult or impossible to present well on a single monitor or projector based system.

Video walls usually rely on delivering an audience to the video wall and are mounted permanently in high traffic area. Portable video walls can remove that constraint, letting you take the video wall on the road, allowing you to deliver the content to potential customers at events, trade shows, training or product launches.

Video walls are a significant investment, whether rented or owned, and they become more expensive when they need to be portable. Portable video walls must to bring their own wall structure to the deployment, be free-standing and modular for quick precise assembly. To maximize use portable video wall systems need to be able to be moved quickly and deployed into multiple configurations and locations. The simpler and more reliable a portable video wall deployment, the lower the overall cost of operating it becomes and the more places it will find good uses.

This document explores the use of a very complete and flexible RPT Modular Video Wall System combined with RPT PopUp Modular Video Wall System with using a single pool of Ultra Thin Bezel LCD monitors to serve multiple use cases within a single corporate environment or rental operation.

Example Monitor Pool: 25 x Ultra Thin Bezel 49” or 55”

 Use Case One (Largest Deployment):  5X5 for Event or Theater Use

 Use summary:  Performance or presentation stage backdrop to replace front projection display.

Frequency: 4-6 Times per year for 2-14 days per event.

Mounting Structure: RPT Modular Video Wall: 5 high x 5 wide Landscape ground supported freestanding for 49” 3.5mm bezel to bezel monitors.

Video Wall Controller: Userful Software Video Wall Controller with ThinGlobal Minipoint DS POE Zero Clients mounted on structure. Userful allows maximum flexibility to quickly configure large video walls for a wide range of inputs and content in any layout desired on the 5×5 array. The HDMI over IP basis of Userful allows small POE Zero Clients to be mounted on the modular structure so that any monitor can drop onto any mount without re-configuring the video wall array.

Mounts: RPT GHB-L3 provide secure drop on and easy adjustment of monitor alignment.. The GHB-L3 mounts were designed for portable video wall use. The GHB-L3 mounts maintain planarity of video wall arrays and have 3 axes of micro-adjustment to quickly align bezel to bezel spacing. The mounting system is slightly asymmetrical to allow the ease use of corner key alignment plates common on video wall monitors.

Layout:  Fully modular, six legs with leveling feet, two layers. Bottom layer is 3 monitors high based on 3” x 6” structural t-slotted aluminum. Top layer is 2 monitors high based on 3” x 3” structural T-slotted aluminum. Longest module is less than 90 inches long and heaviest module is less than 75 lbs for easy assembly by two workers without heavy lifting equipment.

Flexible Deployment options: This RPT Modular Video Wall structure will allow the video wall to be quickly deployed as either 3 or 5 high and user choice of 2, 3, 4 or 5 wide.

Expansion: One video wall five monitors high will be the vertical limit, but additional columns wide can be added at any time in the future, subject to continued same monitor model availability.

Storage of frame and mounts:  RPT Modular frame and RPT GHB Asymmetrical mounts will be disassembled and stored on wheeled storage carts. RPT, as much as possible, will present modules on storage carts in normal assembly order with allowance for less than full deployments if possible.

 

RPT Modular Portable Video Wall Full 5×5 Frame assembled:

RPT Modular Portable Video Wall 5×5 with Monitors:

Note: Height of bottom monitors is a design variable and can be higher. Front feet will typically be covered with a modular carpeted step.

Use CaseTwo:

Multi-wall multi-facility Deployment for varied uses of smaller video walls

Use summary: When not deployed in Event or Theater mode:  Some, most or perhaps all of the 25 monitors will be deployed into smaller arrays in one or more rooms or perhaps different facilities.

Typical deployments will be freestanding 2 x2 and 3 x 3 video walls. The mounts for this use case will be RPT PopUp Portable Video Wall System. We will suggest a mix of 2 High RPT PopUp Monitor Stacks and several RPT PopUp Stacks with the 3 High fold up option. This allows easy expansion should a location require a larger deployment (more walls, bigger walls, or both) for any specific event or purpose.

RPT PopUp Portable Video Wall deployment options:

The RPT PopUp Portable Video wall system uses the same RPT GHB monitor mounting system interface. This reduces overall cost and allows easy exchange of monitors between the RPT Modular 5×5 Video wall and the RPT PopUp video walls. Any monitor in the system can drop onto any mount in the system.

For simplicity of content and set-up, these smaller Multi Purpose Video Wall deployments may or may not have a Userful controller. The controller may have local PC with enough HDMI outputs, or be a controller-less 2×2 or 3×3 daisy-chained tile mode from 4K monitor input.

Here’s a 2 x 2 RPT PopUp Portable video wall, front and rear view for typical trade-show or against the wall use. For corporate or event use we usually propose optional rear covers and doors.

Usually one monitor stack per deployable video wall will have a RPT Modular Rack for the power distribution and video player or controller for each 2×2 or 3×3 RPT PopUp video wall.

The RPT PopUp Stacks are wheeled and flexible. The optional third level deployment is via a fold-up top layer shown folded down in picture below, so they can be deployed 2 or 3 high.

 

This back folding option keeps the rolling height under normal office and truck door levels and allows rolling onto passenger elevators. The stacks without monitors can roll and deploy almost anywhere in any of your facilities.

 

Basic Two high stacks can have the third level retrofit at any time, making it easy to start small and expand over time.

Flexibility of deployment:

RPT PopUp Monitor Stacks quickly connect horizontally with precision machined structural bars, and multiple arrays of like or different deployed height can be connected. This allows the great flexibility of deployment almost anywhere,

RPT PopUp Monitor Stacks can be deployed as wide as you have monitor stacks and connectors. Mixed height arrays are easy, so 2 high and 3 high stacks can move and deploy easily and be connected into much larger video walls.

Here’s an example of a 17 monitor array connected from two 2×2 RPT PopUp Video walls flanking a 3×3 RPT PopUp Video Wall. In this deployment case with this hypothetical 25 monitor pool, there would still be eight monitors free allowing two more 2×2 arrays available for deployment at the same event or elsewhere in the company.

Monitor Road Cases:

Monitors must be removed to clear doors when the video wall is moved room to room. For monitor safety during transport or for storage road cases are required.

Some number of Monitor road cases will be required to reasonably protect and transport the monitors from Theatre Use deployment to Multi-Purpose deployments. If required, the transport of monitors and mounts will generally be accomplished by private truck with ramp, lift gate or loading dock level load and unload. Any monitors moving location to location will require road cases and also road cases for any monitors not deployed for safe storage between deployments.

The monitors may not need to be all loaded into road cases at any one time, but more road cases mean fewer trips to harvest and re-deploy monitors between uses. The Calzone-RPT road cases we supply are specially designed for monitors with the RPT GHB interface bracket attached and each holds two monitors.

For a 25 Monitor pool, presuming local deployments for mixed use cases like this system we’d suggest at least seven double monitor road cases to store or transport up to 14 monitors. This limits a complete re-distribution of all monitors to maximum of two loads and assumes that at least 11 monitors must remain deployed on structures at all times.

Summary:

Portable video walls expand your opportunities to present your message to more audiences at more events than a fixed video wall installation. Flexibility and ease of deployment will increase the opportunities.

RPT Motion supplies portable video wall systems with precision modular mounting technology that allows fast reasonable cost deployment. The ease of deployment will result in higher utilization of the significant investment that portable video walls represent.

A system like the comprehensive 25 monitor one outlined here is a very significant investment. It is important to remember that the modularity of the RPT systems will protect your investment by allowing expansion. Acquisition of this comprehensive 25 monitor system could be staged over a period of time by a series of fully functional sub-set acquisitions. A single 2×2 RPT PopUp Portable Video Wall can immediately bring a new dimension to your presentations and events and become the first part of a much larger future system.

Request more information or ask us for a copy of this white paper in pdf format.

 

Small Monitor Artistic Video Walls

NEC Booth at InfoComm2018 Las Vegas

Artistic video wall of 13 small monitors using some superb NEC Desktop Monitors.

Mounted on RPT MotionInc. DigitalSignMount.com QVWM-UA6 6 Axis VESA 100 Mounts.

Arrays of large monitors get unimaginably huge quickly. Video walls don’t have to be huge monitors. Artistic arrays of small monitors can fill even a large wall quickly and with good content will make a significant visual impact. Perfect for corporate reception areas, retail stores, clubs, restaurants.

NEC wanted to showcase these possibilities for their smaller monitors at InfoComm2018 and came to us for the best mounting solution on the market.

In just 2.6″ of thickness, using CNC machined billet aluminum and creative precision design we pack:

  • Drop on monitor interface (VESA 75, 100,150,200 options) with locking full 360 degree roll adjustment
  • 2.0 “(+/- 1.0”) Horizontal Micro adjustment
  • 2.0 “(+/- 1.0”) Vertical Micro adjustment
  • 3 Point planar micro adjustments for tilt, pan and depth to allow perfect array plane without stressing the monitor frame

Our DigitalSignMount.com business is based on our 37+ years of high precision Industrial automation equipment, so it’s natural that our mount looks completely different than any other mount. We built a set of specifications and did a clean sheet design without looking at how “they” were doing it. In reality, “they” aren’t doing what we’re doing for small monitors.

Installers of small monitor video walls, rectangular array or artistic face a lot of challenges and time trying to align monitors. Most give up or run out of washers and shims long before getting close to perfection.

Because our mounts are an engineered and precisely manufactured product we have a unique method of precision engineered installation support for artistic video walls.

We’ll take your sketches, pictures and choice of monitors and build a 3D model for approval and render it against a wall of the design size. Here’s a 15 monitor example using wonderful NEC EX241BN Ultra thin bezel monitors. The blue frame is a 16:9 aspect ratio which gives an idea of how much of a typical 4K content will display on the monitors. This is the time for adjustments in layout, angles, design, etc.

Once the array design is finalized, RPT generates a CAD model of the drilling pattern to place the mounts on the wall. We add any known important dimensions, like wall width, center lines of the array, monitor outlines, etc. We plot that on a large format printer, 100% full sized. The precision mounting template is taped to the mounting wall and carefully leveled at the desired height and placed horizontally as desired. Drill four pilot holes on the marks for each QVWM-UA6 mount and you’re ready to attach the mounts. The monitor outlines also let you decide where to drill pass-thru holes for cables and if bezels are unequal which side the fat bezel is on. Mount the mounts with 4 screws each and you’re ready to drop on monitors one after the other and align the array perfectly at the design rotation.

For more on the QVWM-UA6 Mount see: http://digitalsignmount.com/2017/09/26/qvwm-ua6-mount-ultra-aligned-arrays/

If you’re interested in an Artistic video wall from small monitors, get us involved early and let us help you take your design from concept to perfectly presented reality.

 

Open post

Array Tilt?

Should a Video Wall Array have tilt? If it’s mounted above the viewer’s head, probably. Stand in a fast food restaurant with digital signage  high up and you’ll find most of the monitors are tilted downward. Easy in a single row of monitors, less easy for a large array.

Logically, we usually see video walls mounted flat on a wall. This is perfect when the visual center of the array is at about eye level. It’s easy and simple, but perhaps not as effective as it might be.

Many arrays will be mounted at a higher level. Often they are at a level where pedestrian traffic can walk under the video wall. We recently proposed an array to be mounted on a large structural pole in a public display. In that location, and due to the audience viewing position, we felt it would be critical to seriously consider tilting the array downward towards the viewers, who would be standing 15-25 feet away.

Most mount manufacturers don’t want to have this discussion because they can’t tilt an array conveniently or safely. RPT’s GHB Mount was designed to modular and with the option to be tilted as needed.

Some boring numbers are essential. If we use home theater guidelines for viewing distance (2-5 times width), a 2 wide x 2 high array of 55″ monitors should be best viewed from  between 16 and 40 feet. If we mount the bottom of the array above door level, say 96″ off the floor, and an average person standing has their eyes about 65 inches off the floor, we’d need to tilt the monitor between 7-18 degrees downward to aim the visual center of the array at the viewers eyes more comfortably.

Here’s a rendering of a front view of such an array

And here’s a view from the side showing 7 degrees of downward tilt. Depending on monitor and installation, RPT GHB Mounts can be installed with up to 15-20 degrees without custom design.

If you’re mounting an array above the heads of your viewer, make sure your message doesn’t go over their heads and talk to RPT Motion about a tilted array mounting system.

RPT Motion can quickly propose solutions to allow you to mount tilted arrays of large monitors which will improve the presentation of your message.

Open post

Portable Video Wall Mount Options

Portable Video Walls aren’t well understood. Frankly, people don’t usually move video walls from place to place because they’re expensive complex systems and the available mounting systems aren’t reliable or simple to move. That’s a shame, we have RPT Modular Video Wall customers who deploy large video walls 40+ times in a few months each year at self-managed trade shows and product launches in smaller cities. Our new RPT PopUp System makes it even easier.

Before you consider the RPT PopUp Portable Video Wall System, you should first look at how you will use your portable video wall. The following questions will help you define your needs and narrow down your selection of portable mounting systems.

Basic questions you need to answer:

Have you ever rented a video wall? A 3×3 video wall will typically cost roughly $10K for a three day event, where they are available. Many smaller cities won’t have easy access to rental video walls, and the costs will multiply if transport and set-up costs are added.

How many monitors will your video wall have? What size monitors?

How many times per year will you move your video wall to maximize its impact and ROI?

Will your video wall stay in one room for its lifetime?

Do you need to move your video wall to different rooms or deploy it on different floors of one facility through standard office doors or on passenger elevators?

Is the primary use for your video wall to take to trade shows? If so are these events at large convention centers or self hosted events at hotels in smaller cities or various customer facilities?

Will your video wall be part of a rental program?

Will your video wall always be deployed in one layout (example fixed as 2 Wide x 2 High Landscape Array) or do you want flexibility and future expandability (example the nine monitors in a 3×3 array could be deployed as two 2×2 video walls)?

What type of content will you display on your video wall, what resolution is that content produced in, and what type of video wall controller will you select to place your content on your video wall?

Who will be responsible for the basic integration of the Portable Video Wall mounting, monitors, player, power distribution, cabling and any other required hardware? Where will all that hardware be mounted?

Once you understand the purpose of owning a portable video wall, you can start looking at ways to mount it and more importantly move it.

Option to explore:

The first thing we will do is send you to another top-notch supplier, so that you can educate yourself to some options. At first glance, RPT PopUp Video Walls will seem to be  significantly more expensive than this option, so if this works for you you might be able to save money. Often we find potential customers have budgeted for this type of mounting without fully understanding the limitations. Or worse, they own these mounts and moving the video wall is inconvenient so it never moves place to place.

The lowest cost and simplest portable video wall mounting system is a single cart type of mount for a fixed number of monitors. If this type of mount works for you, please understand the limitations and then choose a quality cart of suitable capacity.

Here’s a link to typical fine example of a quality cart type of single layout mount from Milestone (formerly Chief):

See:  http://www.chiefmfg.com/Products/LVM2X2U

It handles up to 50” monitors and provides micro adjustments mounts for the monitors. It is assembled on site from a kit of parts (Assembly manual link: http://downloads.chiefmfg.com/MANUALS-I/LVMSeries-I.pdf) and the completed assembly measures 80.5” high x 72.5” wide x 40” deep without monitors.

This type of simple single layout cart is a good choice for a simple low cost self-integrated video wall that won’t ever be moved room to room or facility to facility. Even without monitors these carts won’t fit through standard office doors or onto passenger elevators unless you take the cart apart to move it. There are wiring passages in the frame, but you will need to integrate and enclose your power distribution and any network or video wall controller hardware you require to move with the video wall.

All of these integration issues multiply if you’re deploying larger arrays (example 3×3) and each layout of array requires a specific model of cart, there is no clean upgrade path to larger arrays or deploying a large array as two smaller ones.

If a simple cart type of mount works for you, it may at first glance seem to be lower cost than the RPT PopUp System, but the time, integration quality and total cost may vary widely.

Monitors are the most fragile part, and the most expensive:

We’ve seen a lot of poorly mounted simplistic modular portable video walls at trade shows and other events from smaller manufacturers. These can take a long time to properly align into an attractive and professional looking array, an exercise that repeats every time you move your video wall.

You really need to be 100% confident in the rigidity and accuracy of the mounting system when using Ultra Thin bezel monitors (3.5mm Bezel-Bezel like the 49″ Philips BDL-4988XC is the smallest bezel we recommend for portable video walls).

Ultra thin bezels make for easily broken monitor glass with any impact especially to corners. Quality monitors are the biggest cost in a video wall and are the most likely components to be broken when moving a poorly mounted in a portable video wall.

RPT highly recommends properly designed road cases for the monitors of a portable video wall to protect the monitors during a move. RPT partners with Calzone Cases for dual monitor road cases predesigned for maximum protection of the 49” and 55” monitors we recommend. These cases allow one person to safely move two monitors at a time.

Why RPT PopUp Portable Video Walls?

RPT provides a rugged precision portable video wall mounting system designed for modern Ultra Thin Bezel monitors.

Our  RPT PopUp Video Wall deploys quickly, typically a 2 x 2 wall will be content ready in under 30 minutes, often 15 minutes.

Our Monitor stacks include standard front panels and rear cable bins to catch excess cables, this allows simple integration. As well, we build on t-slotted aluminum and that offers an unlimited number of places to secure cables and other hardware.

For more on integrating RPT PopUp Stacks see: http://digitalsignmount.com/2018/02/06/rpt-popup-video-wall-integration/

RPT offers options like rear doors to make your PopUp Video wall look finished from behind if needed:

If you’re using an HDMI over Ethernet Video Wall Controller like Userful or MonitorsAnywhere, RPT offers mounted ThinGlobal MiniPoint DS Power Over Ethernet Zero Clients at each monitor location.

We will integrate our RPT PopUp System to any desired level, from naked non-folding mounts for you to integrate all the way to fully folding and wired plug and play. Because of that experience, we’ve already answered most of the hard integration questions and can quickly deliver what you need: A reliable and safe portable video wall, or components to help you do the integration yourself.

We offer an optional  RPT Modular 4U rack mounted to the back of one or more monitor stacks to carry your network, power distribution, Uninterruptible Power Supply and Video Wall Player or Controller hardware securely and neatly.

We always offer expansion and variety of deployment configurations as a retrofit at any time from a basic 2×2 array through 4 high x as many wide as you want, all without losing your initial investment. This can allow multiple smaller video walls or one large one from your pool of monitors. A common example would be one 3×3 trade show Video Wall deployed as two branch office 2 x 2 RPT PopUp Video Walls when not at trade shows.

Or a collection of several branch office RPT PopUp Video Walls merged into a 17 monitor back wall of a 20 foot trade show booth:

Simply put: RPT PopUp Portable Video Walls are a premium option that will make your Portable Video Wall easier to integrate, more flexible, more reliable and easier to deploy more often in more places.

Tell us what you need to do, you’ve answered the questions above, we have the solution.

Open post

RPT PopUp Arrays Non-Linear

Variable Height Arrays

RPT PopUp Portable Video Wall Stacks can deploy at 2, 3 or 4 high across a linear array as wide as you want. The stack spacing is precision set to the monitor width by three precision machined structural crossbars. Note that the stacks can be deployed at differing heights (2, 3 or 4 monitors high) across an array.

Angled Arrays

The stack to stack connection can also be a precisely angled connection, using the same precision connection points on each stack with three custom machined RPT structural connector bars. Same stacks, fast set-up, same accuracy of spacing. This capability allows a lot of flexibility for angled corners, curved arrays and mixes of straight and angled.

Here’s an mock-up of an eighteen monitor, 10 x 20 Foot trade show booth (wall is 20 ft x 10 feet x 8 feet high for reference) with six RPT PopUp 49″  Stacks deployed three high. There is a flat 3 x 3 Array on the left, then the three stacks on the right side form and finish a 90 degree angle.

Another example is a large curved array or two:

We can produce the angled connections at custom angles, so the curve can be gentle for a wide audience or steep for an immersive smaller feel.

Eagle Eye view:

 

Two Curved Arrays

These could be connected at the rear by a flat array as wide as you want.

A large corner array:

With eight stacks of 49″ Monitors this fills a 20 foot x 20 foot corner with video wall.

If you want a Portable Video Wall with extreme flexibility of simple and creative deployment, rapid and precise set-up, the RPT PopUp Portable Modular Video Wall System has the answers you need.

Please contact us for more information:

Open post

RPT PopUp Video Wall Integration

From naked RPT PopUp Monitor Stacks ready to integrate into your own PopUp Portable Video Wall, to custom fully integrated systems, RPT has got you covered. We know what is required and available to help you ensure that your RPT PopUp Portable Video Wall system is a reliable success in the shortest possible timeline.

We don’t sell monitors with our RPT PopUp mounting systems,  because that would just add to the final cost of a portable video wall. Instead, we qualify and approve several high quality Video Wall monitors in both 49″ and 55″ sizes and build standard quick delivery systems to use with those monitors. We can likely build custom dimension RPT PopUp Stacks to accommodate customer needs or existing fleets of monitors in rental programs that want to add RPT PopUp video walls to their offering. In today’s competitive market, you’re frankly better off buying monitors on our list from the best priced dealer or re-seller in your area or on the Internet.

Monitor Road Cases are a must for any Portable Video Wall, even one that stays in the same facility for its entire working life. We don’t sell Monitor Road Cases, but we have a monitor case partner, Calzone Case Co. who build reasonably priced, very high quality custom road cases that store, protect and safely ship two monitors per case. We work with Calzone Case Co. to ensure that the approved monitor with RPT GHB mount interface attached fits perfectly. RPT supplies a part number for the case and then you deal directly with Calzone Case Co. or you can choose to get your own cases built at your own effort, time and risk.

The RPT PopUp Portable Modular Video Wall System is purposely designed to allow very flexible customer integration. We’ve done a lot of integration and the results are available for our customers. RPT can provide a lot of advice and components to simplify integration of the perfect PopUp Portable Modular Video Wall system for your own choices of hardware. We’ve solved most of the problems you or your local integrator will face. If you’d rather, and are willing to work with the hardware the RPT knows will work, RPT can build and deliver custom fully integrated RPT PopUp Portable Video Wall systems.

Modular means flexible. We can offer many optional features like rear door panels to fully enclose and hide the wiring and mounts while still allowing easy access for adjustment. Because our system is based on structural t-slotted aluminum extrusions, we have tremendous flexibility to add things that you may need.

Unless you’re doing the simplest tiling of a single input 4K image onto a single zone  2 x 2 or 3 x 3 video wall, you will need to choose a suitable multi output media player, or a PC that can handle as many monitors as you want, or a hardware video wall controller, or a software video wall controller like Userful or MonitorsAnywhere. Each solution has specific benefits and costs, as well as limitations. But in any of these solutions, being portable means you’ll need to enclose and transport electronics and wiring.

We prefer having a RPT PopUp Video Wall system with a master stack that has the Video Wall Controller and network infrastructure on-board and connected. The basic video wall controller infrastructure rolls in with one of the stacks.

RPT is a fan of Zero-Client based Video Walls. Zero Clients are basically HDMI over Ethernet decoders. The same exact Zero-Clients and network infrastructure can handle MonitorsAnywhere’s PC based Network Video Wall or Userful’s Software Video Wall Controller. Userful has huge capacity for monitors, inputs, content and complex layouts including artistic layouts and Cloud based management. MonitorsAnywhere basically turns your video wall array into a giant Windows monitor, so anything you can display on your Windows PC can display on your video wall.

Here’s an example of an integration option: RPT PopUp 19″ Rack (4U) that can be added to the rolling base of any standard RPT PopUp Video Wall stack at the rear.

There is a latching rear door and a latched down top cover to protect wiring once your system is deployed. We use industrial grade wire mesh on all other sides for airflow. We can easily customize the height (rack depth) and the types of panels or mesh as needed.

A small PopUp Stack detail that we include standard: You’ll note that just on the other side of the rack is a wire bin that’s built onto every RPT PopUp Stack. It’s an open top enclosed place to drop the extra wire you’re sure to have when quickly setting up RPT PopUp video walls.

This rack has a small format (not rack mount) PC based Userful Server held in place with an RPT CPU Clamp and there’s also a 19″ rack mount POE (Power Over Ethernet) Gigabit Switch. The T-Slotted construction makes it easy to add tie-down points for cables with a low cost quarter turn wire tie mount.

With the top cover off below, the black cables are power cables to the Userful CPU and to the Network POE Switch from the left side mounted surge suppressed power strip, the Blue cables on the right are Ethernet cables to this stack’s  two ThinGlobal Minipoint DS POE Zero Clients, and the red cable is to our in-house network. Note at the bottom left are the only two external connections required to this stack: Power and if needed for content a wired Network.

Userful is immensely powerful and can handle up to 100 Monitors per high-end Userful Server. RPT PopUp Video Walls can connect as many stacks  wide as you own monitors. If you needed a really large array, we’d simply add a second RPT Rack onto an adjoining PopUp Stack to your system to house a Rackmount 4U high-powered Userful Server and of course a much more powerful POE switch with enough POE Ports ad power plus a 10 Gigabit Ethernet to link the few feet between them.

Even with low monitor count Zero-Client based video walls, you’ll probably want to mount a power strip on each RPT PopUp Monitor Stack to supply power to up to four monitors. Then between stacks you need only run an Ethernet cable to each Zero Client on the other PopUp stacks to the POE Switch connected to the Userful Server or Monitors Anywhere Windows PC.

On large arrays, you will likely place the Server Equipped PopUp Stack somewhere in the middle of the array and cable the network outwards towards both sides. The latching door makes it easy to reach the Userful Server power switch or make a connection even when the top cover is latched down to cover the wiring.

 

Please contact us with any questions you have, we’re happy to be on your  RPT PopUp Portable Video Wall integration team.

RPT PopUp Portable Video Wall Stacks

RPT PopUp Stacks are the building blocks of the RPT PopUp Portable Modular Video Wall System. Each RPT PopUp Stack is a precision mount for a column of two, three or four 49″ or 55″ Ultra Thin Bezel Video Wall monitors in landscape orientation.

An introductory YouTube video on this system:

Here’s the PopUp Stack family picture for the RPT PopUp Portable Modular Video Wall System. Each model shown folded and in the stages of deployment: Folded (if it’s a foldable version), Two High, and Three High. Not shown is the RPT PopTopUltra, an optional quick connect fourth row of monitors, which can be selectively added to RPT PopTopMax and RPT PopTop three high stacks if you need to deploy huge arrays.

RPT PopUp Stacks, without monitors, are designed to roll through standard office doors, onto passenger elevators, and for local deliveries into trucks or trailers, or for Common Carrier LTL freight into the smallest possible road-cases.

RPT PopUp Stacks connect horizontally with precision machined quick connect spacers. In a few minutes these precision spacers form RPT PopUp Stacks into a precisely spaced, rigid and precision aligned structural array of RPT GHB series 3-axis micro-adjustable mounts ready to drop monitors onto.

RPT PopUp Starter System:

RPT PopUp Portable Modular Video Walls protect your initial investment by offering an upgrade and retrofit path to build larger arrays, so there’s nothing to lose by choosing a small starter system.

RPT PopUp Portable Video Wall basic starter system, a 2 x 2 array, front and rear deployed views. This level is the starting point for small business local rental offerings as well as for corporate or commercial uses where a video wall that can quickly move to a different location within a facility or a different facility is valuable.

Extending the RPT PopUp Video Wall System:

By adding as many additional stacks as you need, any rectangular array of 2, 3 or 4 monitors high can be quickly deployed. Larger arrays require a proper Video Wall Controller. RPT can add optional custom mounted ThinGlobal POE ZeroClients and with an HDMI over Ethernet  video wall controller like Userful’s Software Video Wall Controller or MonitorsAnywhere Network Video Wall it becomes very simple to reconfigure one or multiple video walls and display contents from one or multiple inputs to quickly display complex content on the array. For speed and connection convenience, RPT has  options for including a small rack mounted Power Distribution and Gigabit POE Network Switch options on some of your stacks.

Here is an example of a 2 high x 4 wide array, assembled from two RPT PopUp starter systems plus one extra set of precision connector bars.

RPT

RPT PopUp Portable Video Wall Multi-Height Arrays:

PopUp Stacks in an RPT PopUp Video Wall have the same bottom row height, but don’t need top be deployed at the same top height. Here’s a simple multi-height deployment assembled from a single three high stack added to a 2 x 2 starter array:

Here’s a PopTop 3×3 Portable Video Wall

Thinking outside the box a bit, owning a 3 x 3 system with 9 monitors, adding a single extra RPT PopUp Stack to your RPT PopUp Video Wall System allows you to deploy two 2 x 2 Arrays in the same or different locations. Or deploy a single 2 high x 4 wide array, plus as many other combinations of 4 single or joined stacks as you have monitors for. That kind of deployment flexibility maximizes flexibility of uses, as well as customer options and deployments in rental businesses, significantly increasing use and payback or income.

The RPT PopUp Portable Modular Video Wall System allows you to quickly deploy small 2 x 2 to truly monster video walls quickly, accurately and reliably. To protect your investment you can start with a small system small and upgrade or expand capabilities incrementally as your needs or markets grow.

Single facility, corporate road show circuit, or small to large rental programs: just let us how big your array should be and how you would imagine using a freestanding portable video wall and we’ll propose a system that meets your needs today and expands to your future needs. Contact RPT Motion for more information on the RPT PopUp Portable Modular Video Wall System:

Open post

Tiling Video Wall Monitors

Tiling: Can or should you lose the Video Wall Controller?

The picture above is a 2 x 2 deployment of the RPT PopUp Portable Modular Video Wall System. This modular, expandable and extensible system allows users to safely dismantle, transport and redeploy small to very large video walls quickly, safely and accurately. The modules wheel through standard office doors and using passenger elevators. The 2 x 2 Entry level system above, in a corporate facility or local rental environment, might be a great application that avoids the cost and complexity of a video wall controller and gives users a simple single port input. Any bigger and you probably want the capabilities and expense of a Software Video Wall Controller.

In the chart above, the left column is a 4K resolution array of 2 x 2 landscape array of 1080P monitors (1920 wide x 1080 high). The third column, a 4 x 4 array of 1080P monitors is 8K displayable resolution which has 4 times as many addressable pixels as a 4K resolution.

You can also compare square footage of an array screen. Given same monitor size, a 3 x 3 array has resolution and screen area 225% of the 2 x 2. A 3 x 3 array of 49″ monitors is over 7 feet high (plus clearance from the floor) and over 10 feet wide.

Resolution Confusion

I recently had a conversation with a video wall customer that highlighted significant confusion some users can feel when implementing a video wall. His high resolution content was the simplest possible: a single 4K full screen feed of 4K movie playing from a dedicated PC in a loop for a museum environment on a 2 x 2 array of large monitors.

Were they better off buying 4K monitors or 1080P monitors? What was the simplest and most cost effective video output from the PC to the array? The question of signage monitor tiling came up, and the customer had been confused by prior misinformation. Once they understood the issues at hand, they chose an array of 1080P monitors able to tile 4K input.

What made this application possible without a video wall controller is the simplest possible full screen single input content, and a perfect match between the 4K input resolution and the 4K array resolution.

Typical Video Walls:

Typically Video Wall Arrays are built with 1080P monitors connected to a PC video card with multiple outputs, to a hardware video wall controller, or to a software HDMI over Ethernet video wall controller like Userful or MonitorsAnywhere. The bigger the array, the more wires and configuration options are available. There are excellent reasons to use  Userful, Monitors Anywhere, or other video wall controllers, but tiling might be a good choice if your content is simple, your array small and you understand the limitations.

Content is important in your decision:

Sometimes we can avoid the complexities and cost of a Video Wall controller or use of a multi-output video card and the related complexity and cost. Before we evaluate and choose the best option, we first need to understand the limits of the content we will display and also the limits of the controller options we might choose.

Tiling: Input Resolution and Output resolution

Most serious digital signage monitors offer tiling options with single input and a daisy chained array of monitors. Earlier models have generally produced less than satisfactory results because they expand the 1080P (1920 x 1080) input signal to as many monitors as you have in your array.  You can manufacture or simulate resolution missing from your input.

Each monitor is assigned an array location at set-up and displays only the proper assigned section of the 1080P signal for that assigned location. A 5 x 5 tiled array of monitors will display each pixel in the 1080p signal at a 5 pixel x 5 pixel “clump” of pixels that may be easily visible. Your array surface may be huge, but your resolution won’t be larger than the original input, so an image viewed from close distances might be grainy.

1080P Full Screen Content as input

If the content input to an array will always be a single 1080P signal displayed full screen, then even the most impressive and expensive video wall controller or monitors can’t improve your displayed resolution. Whether you tile in the monitors or expand in the controller the results will be basically the same. If 1080P will your only content input and will always be output to a full array screen, you will lose display resolution whether you output to a single 4K monitor or an array of 1080P monitors tiled.

4K Full Screen Content

4K inputs might be a single 4K PC monitor output, or perhaps a single 4K output from another 4K source like a 4K Blu-Ray player, 4K AppleTV, etc. If we have 4K content to display, we should have the full 4K monitor resolution from input to screen and be able to display it fully.

A “starter array” of 2×2 landscape 1080P monitors technically has exactly a 4K displayable monitor resolution of 3820 x 2160. If your content is produced and delivered in 4K resolution and will always be displayed full array screen, this seems like a perfect fit.

The newest generations of many digital signage 1080P monitors now offer 4K inputs that can be tiled over daisy-chained arrays, allowing full 4K display at full resolution 4K on a 2×2 Array of 1080P monitors without using a Video Wall Controller. The Viewsonic 49″ and 55″ and Philips 49 and 55″  Monitors that we have qualified for RPT PopUp Video Walls have this functionality to display 4K on 2 x 2 tiled array of daisy-chained 1080P monitors. We suggest that you download the manuals and understand the limitations that may vary between manufacturers and models when 4K to 2×2 Tiling.

These monitors also offer bezel compensation via the monitor set-up menus, so you’ve get everything you need to present a full screen, high quality 4K image from a single 4K input without the expense of a video all controller.

Ultra Thin Bezel (3.5mm Bezel to Bezel)  4K input 1080P signage monitors are common and have been dropping significantly in price  as I write this.

In conclusion, for the simplest content and arrays, the availability of 4K monitor tiling on 1080P monitors brings reduced cost and simplicity of set-up to 2 x 2 or larger Video Wall Arrays. If your content is single output full screen understand the limitations of tiling, you can make an intelligent decision whether you should use monitor tiling instead of a video wall controller.

Ask us for more information on RPT PopUp Portable Video Walls in 2 x 2 Arrays with tiling:

Open post

RPT PopUp Video Wall Introduction

This will begin a series of posts leading to the launch of RPT Motion’s Portable PopUp Video Wall.

PopUp Kiosks, PopUp Boutiques and PopUp Stores are modern buzzwords and marketing tools.  We’re also seeing growth in small private single supplier trade shows, training events and seasonal product launches. Usually self-managed, these events are popping up in more locations, at smaller venues, even local hotels.

Portable PopUp Video Walls would be a great marketing tool, but quality video wall arrays are difficult to PopUp. As a result, rental video walls are usually not available in smaller markets or hotels where lower potential volumes make local supply either inaccessible or very expensive. Even in larger markets Rental Video Walls are usually expensive to deliver, set-up and configure. With high set-up costs, smaller or shorter events just can’t afford a video wall. As a result, conventional Video Walls are expensive to rent and unavailable in many smaller markets.

Portable Video Walls are difficult to deploy multiple times quickly and usually difficult to reconfigure to different array sizes and inputs. This is largely because there has been no available fully integrated Portable Video Wall deployment solution that is flexible, cost effective and convenient. As well, the deployed quality and ease of content presentation varies widely from horrible to acceptable.

RPT Motion Inc. has been in the industrial automation business for 37+ years and has built custom modular portable video wall mounting systems for close to a decade. These have generally been custom built for customer trade shows and corporate road shows. Some of these systems have been deployed hundreds of times since new and are still in use. When we’ve attended trade shows with our custom modular video walls, we consistently have the fastest installed and best aligned wall in the show. But our first generation modular video walls were aimed at single layouts, rectangular or artistic and were excellent free-standing mounting systems without full integration.

Integrating a complete plug and play, high quality portable video wall system is a complex multi-disciplinary task that takes time, money, knowledge and risk beyond what most Video Wall end users are willing to invest and usually beyond their level of technical competence. Often the solution chosen is expensive and more often it’s a tinkerer’s nightmare to set-up and configure late into the night before the show.

What if you could walk in and confidently PopUp an aligned and configured video wall and display content in under an hour? Then anytime you needed to move that wall, even through people sized doorways, down hallways, into passenger elevators and again have content up in an hour or less at the next location? What if, using the same hardware you could configure a 2 x 2 wall today, a 3 x 3 wall tomorrow and even a 3 x 30 wall or any other combination of walls if you had enough monitors, space and content?

An example of RPT PopUp flexibility adding value would be a small Video Wall rental operation owning 18 monitors, usually deployed as two 3 x 3 arrays. Each 3 x 3 array could also be deployed as  two 2 x 2 arrays, so you could service one large (3 x 3) and two small (2 x 2) rentals from the same pool of monitors, or deploy a single super wide array of 3 high x 6 wide at the CEO’s mansion for a March Madness Bash or Superbowl Party displaying multiple feeds from 4K and 1080P sources? With our top level PopMax series, you could deploy a 4 x 4 Array of 55″ monitors and output full resolution 8K content on a 220″ diagonal screen

In 2018 these scenarios are not just possible, it’s all easy and quick with RPT PopUp Video Walls.

RPT PopUp Video Wall: What’s Changed?

There needed to be a better way.

It’s the start of 2018 and we’re in the right place at the right time. Over the past few years a lot has changed in the technology of video walls to help enable RPT’s PopUp Video Wall Systems. The two major industry changes are Monitors and Controllers. One makes a video wall less expensive and one makes a video wall less expensive and easier to configure and implement.

Monitors: Video walls need a bunch of big monitors. You don’t need 4K monitors in Video walls because you don’t have content or display ability to benefit from all that increased resolution in an array. High quality 49” and 55” ultra-thin bezel 1080P video wall monitors, the sweet spot for RPT PopUp Video Wall Arrays, are now dropping significantly in price.

Controllers: The evolution of modern and flexible software video wall controllers with HDMI over Ethernet Zero Clients, such as Userful’s Software Video Wall Controller is advancing rapidly. The configuration of video walls and connections of content and inputs to video walls is now easier and more flexible than ever. In the simplest deployment a mid-range Userful Server can be configured as a simple appliance directing a single user output (4K or 1080P) to one or more video walls networked with Gigabit Ethernet. Extended to maximum, a high end Userful server can configure one huge or multiple smaller video walls, can use 4K and multiple 1080P inputs, Ethernet cameras,  web and locally stored content all configured, scaled, scheduled and looped as needed.

A high end Userful Software Video Wall Server can handle one hundred monitors. If you needed a 2 high x 50 wide, 3 high x 33 wide, 4 high x 25 wide or multiple arrays of some random mix of heights and widths, Userful can deliver content to it. The RPT PopUp Video Wall System is 100% ready to deploy in that or any other configuration. A more likely real world example is that a 20 wide foot trade show booth rear wall can be completely filled with a 2 or 3 high x 5 wide array of 55” monitors.

Ask us for more information on RPT PopUp Portable Video Walls

Open post

Fields of View

The digital signage industry is significantly about delivering dynamic content on monitors to generate customer engagement. Too often we fail to consider how we might better locate and focus displays to increase the chances of those displays being visible enough to quickly catch the eye of that customer we want to engage.

Placement and aiming of monitors in retail or other public spaces is a complex subject that could fuel neurological behavioral doctoral dissertations, but a basic understanding of a few parameters might significantly improve your monitor’s chances of being seen well enough to grab the viewer’s attention.

A walking pedestrian is actually a very poor target for digital signage, because we’re programmed with a self protecting nature that focuses while walking on identifying potential obstacles in a narrow forward band from O degrees( level) to approximately 10 degrees downward. As a result, unless we start embedding monitors in floors, it’s most likely that your monitor will first be seen in the peripheral vision of the target audience.

When an object enters the peripheral vision of a walking person we don’t actually think about it, rather it is quickly processed in our subconscious process and evaluated as to importance before we might turn our conscious focus towards it. First priority is danger then interest. It seems entirely logical that a monitor better aimed at the target will probably stand a much higher chance of interrupting the walk, while a monitor aimed poorly will generally just be ignored.

The better the aiming of the monitor at the eyes of the viewer, the more likely the message will be processed as relevant enough to grab the conscious attention of the viewer, ideally even stopping their walk and lifting their eyes.

The harsh reality of most public environments is that monitors must often be mounted in less than perfect locations, above the heads of walkers, or on the sides of typical walking patterns or attached to walls facing on perpendicular or parallel planes to your potential customer’s Field of View.

Stacked monitors starting near floor level and if possible aimed outward from the wall and towards the target are possibly better at getting attention than a single horizontal row of monitors at eye level or above heads.

Many have come to understand that Artistic or Mosaic arrays will also grab more attention. Perhaps some of the subtle magic of an artistic or mosaic array is that their irregular shape can’t simply be processed to be subconsciously ignored as just another rectangular screen.

Here’s a great example video worth watching from Userful of an Artistic Video Wall that’s really impossible to ignore.

Walking towards this complexly creative video wall from either direction will engage a downward looking view because the stacks of monitors rises from close to the floor, plus the 3 high portrait stacks are angled towards the viewer rather than being flat on the wall. The back sides of each zig-zag stack forms a second video wall that engages the reverse traffic with different content. This video wall is a real stop and stare opportunity that grabs attention.

A flexible mounting system is important, but most commercial monitor mounts have evolved slowly from the early era of mounting single monitors flat on a wall. Mounts that can quickly and rigidly mount digital signage monitors at different precisely designed angles aimed at a target are not common. If enough monitors are being mounted, sometimes a custom engineered and fabricated mount is a good option, but that’s likely expensive and long delivery.

Mounting monitors using precision modular assemblies is one of RPT Motion’s specialties. We have extended our proven modular Quick VESA industrial monitor mounting system to include modules that allow freely adjustable or fixed by design options for combinations of pan, tilt and roll angles for an installation may require something different for best visibility. RPT can now offer these options in quickly custom engineered mounts with precise angles that allow much better optimization of where your monitor is aimed.

RPT’s Quick VESA Targeted Focus or QVTF range of products is modular, allowing RPT to quickly propose, quote, build and deliver from one to thousands of ready to install mounts precision built to the best angles for your installation. The QVTF range is especially capable when working with small to medium (24-42”) monitors with VESA 100×100 thru VESA 200×200 mounting patterns. We also have excellent options for larger monitors, so we can offer you angled and multi-sided solutions targeted at all monitor sizes and layouts.

Here’s a standard very simple straight RPT Double sided wall mount which puts the aim of the monitor parallel to the walls and walking path. The “arm” can extend the monitors as far as you wish away from the wall, but they still don’t really ever face most viewers walking towards them.

 

 

In the same setting here’s another type of double sided RPT Wall Mount with the monitors angled. The angled monitor faces more easily engage directly with more eyes. These monitors protrude less from the wall, but are more visible.

Our point today is that to maximize your investment you should go beyond generic catalog mounting and properly explore the best options for mounting and aiming your monitors.  RPT Motion’s DigitalSignMount.com group has a comprehensive range of monitor mounting engineered modules and 25+ years of quickly building precision modular assemblies with t-slotted extrusions. We combine those assets into custom built for your application monitor mounting systems for just one or thousands of monitors. Mount it properly and it will generate better interest and better returns.

Send us a note about how you want to mount your monitors. We’ll quickly offer you reliable, proven options that are quickly and cost effectively custom tailored to your monitors and location.

 

 

 

Posts navigation

1 2
Scroll to top