RPT PopUp Arrays Non-Linear

Variable Height Arrays

RPT PopUp Portable Video Wall Stacks can deploy at 2, 3 or 4 high across a linear array as wide as you want. The stack spacing is precision set to the monitor width by three precision machined structural crossbars. Note that the stacks can be deployed at differing heights (2, 3 or 4 monitors high) across an array.

Angled Arrays

The stack to stack connection can also be a precisely angled connection, using the same precision connection points on each stack with three custom machined RPT structural connector bars. Same stacks, fast set-up, same accuracy of spacing. This capability allows a lot of flexibility for angled corners, curved arrays and mixes of straight and angled.

Here’s an mock-up of an eighteen monitor, 10 x 20 Foot trade show booth (wall is 20 ft x 10 feet x 8 feet high for reference) with six RPT PopUp 49″  Stacks deployed three high. There is a flat 3 x 3 Array on the left, then the three stacks on the right side form and finish a 90 degree angle.

Another example is a large curved array or two:

We can produce the angled connections at custom angles, so the curve can be gentle for a wide audience or steep for an immersive smaller feel.

Eagle Eye view:


Two Curved Arrays

These could be connected at the rear by a flat array as wide as you want.

A large corner array:

With eight stacks of 49″ Monitors this fills a 20 foot x 20 foot corner with video wall.

If you want a Portable Video Wall with extreme flexibility of simple and creative deployment, rapid and precise set-up, the RPT PopUp Portable Modular Video Wall System has the answers you need.

Please contact us for more information:

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to top